Lower leaf temperatures, create instant humidity, and cool down air temperature with the mister system. The Mister Assembly includes a preassembled mister and riser with 1/4 in. barbed inlet thats ready to install. Works when installed upright or upside down. The fan-spray emitter delivers water in a full-circle pattern at 4-7 GPH and radius of up to 1-1/2 ft. (at 15-50 PSI). Adjust from fine to heavy mist with a twist of the dial. Use the attached in. barbed inlet to connect to 1/4 in. supply tubing. Mister and riser are made of polyethylene treated with UV inhibitors.
- Ideal for watering plants in hanging baskets, ferns, and baskets; creates humidity for hot houses, greenhouses, and atriums; also works for outdoor cooling, as immediate evaporation of the mist can reduce the air temperature
- As part of a complete drip irrigation system, the emitter delivers water gradually; with this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
- Mister Assembly comes preassembled so its ready to installconnect in. barbed inlet into in. supply tubing with 0.170 in. internal diameter (ID)
- Periodically check for damage and replace as needed
- in. barbed inlet connects to in. supply tubing with 0.170 in. internal diameter (ID)
Comes with five Mister Assemblies, each assembly includes a mister and riser with 1/4 in. barbed inlet
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
