Insert a 90 bend to your drip system with the 1/4 in. Barbed Elbow. This micro fitting connects two sections of 1/4 in. supply tubing or dripline, or connects 1/4 in. tubing to a punched hole on any size supply line. To install, insert the single-barbed tip inside the drip tubing opening and anchor in place. For rigid tubing, try soaking the tube in hot water or leaving out in the sun to make it more pliable. Use the fittings to set up a new drip system or expand or repair an existing system. Reusable micro fitting is made of acrylonitrile butadiene styrene (ABS).
- Works in a variety of areas, from small to large, flat or sloped; transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
- As part of a complete drip irrigation system, the 1/4 in. elbow connects 1/4 in. supply tubing or dripline together, or connects 1/4 in. tubing to other drip irrigation parts to transport water to the area to be irrigated
- Insert barbed end into the drip tubing opening and anchor it in place. (Tip: soften the tubing end so its easier to work with by soaking in hot water or leaving out in the sun for pliability)
- Periodically check for leaks or damage and replace as needed
- Fits in. tubing with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in
in. barbed elbows come in a pack of 10
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
