When youre connecting your drip irrigation system to a water source, dont forget the pressure regulator. Without it, the excessive water pressure can blow out emitters and fittings, and damage your system. The pressure regulator lowers the water pressure to a set pressure so your drip system can work effectivelykeeping your fittings and emitters in place, right where you need them. The in. FPT X in. FPT pressure regulator is preset at 30 PSI, and commonly used to connect an existing underground irrigation system with in. MPT pipe to control the water pressure. Install with the directional arrow pointing in the direction of water flow. The pressure regulator is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors.
- Connect to an existing underground irrigation system with a in. MPT pipe
- Drip irrigation systems work with low water pressure, and the pressure regulator lowers the water pressure from a water source for optimal drip system performance
- Attach the pressure regulator to an existing underground irrigation system with a in. MPT connection point
- Periodically check for damage and replace as needed
- Attach to an existing underground irrigation system with in. MPT pipe or fitting; position arrow on device in direction of water flow
Comes with one in. FPT X in. FPT Pressure Regulator
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
