Did you know the water pressure from a typical water source can be excessive for a drip irrigation system? This leads to emitters and fittings popping off, and the strain can damage your drip system. Put a pressure regulator in place to lower the incoming water pressure and keep it at a constant rate even when the water pressure varies. This pressure regulator is preset at 15 PSI and has a 3/4 in. FPT inlet and outlet. Connects to sprinkler and drip irrigation systems. Made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors.
- Works with a sprinkler or drip irrigation system
- Drip irrigation systems work with low water pressure, and the pressure regulator lowers the water pressure from a water source for optimal drip system performance
- Attach the pressure regulator inlet to an existing underground irrigation system with a 3/4 in. MPT connection point; outlet to 3/4 in. MPT pipe or fitting
- Periodically check for damage and replace as needed
- Attach to an existing underground irrigation system with 3/4 in. MPT connection point; position arrow on device in direction of water flow; connect 3/4 in. FPT outlet to 3/4 in. MPT pipe or fitting
Comes with one 3/4 in. FPT X 3/4 in. FPT Pressure Regulator
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
