The 1/4 in. Barbed Tee connects three sections of 1/4 in. supply tubing or dripline for a T intersection. It also connects two 1/4 in. branches to a punched hole in any size supply line. To install, insert the single-barbed tee inside the drip tubing opening and anchor in place (Tip: soften the tubing end so its easier to work with by soaking in hot water or leaving out in the sun for pliability.) Use fittings to set up a new drip system or expand or repair an existing system. Reusable micro fittings are made of acrylonitrile butadiene styrene (ABS).
- Works in a variety of areas, from small to large, flat or sloped; transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
- As part of a complete drip irrigation system, the 1/4 in. tee connects 1/4 in. supply tubing or dripline together, or connects 1/4 in. tubing or dripline to other drip irrigation parts to transport water to the area to be irrigated
- Insert barbed end into the drip tubing opening and anchor it in place. (Tip: soften the tubing end so its easier to work with by soaking in hot water or leaving out in the sun for pliability)
- Periodically check for leaks or damage and replace as needed
- Fits in. tubing or dripline with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in
in. barbed tees come in a pack of 10
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
