Prevent water from flowing out the end of your tubing with the 1/2 in. Compression End Cap. This fitting works with 1/2 in. distribution tubing or dripline, and has a removable cap to flush out the line as needed or to expand your system. Tubing fits into the compression ring, where an internal barb compresses the tube. Got tough tubing? Try softening the tubing material by soaking the ends in hot water or leaving them out in the sun. The compression end cap is made of acrylonitrile butadiene styrene (ABS), a type of plastic, treated with UV inhibitors to prevent cracking.
- Works in a variety of areas, from small to large, flat or sloped, at the end of the drip line
- As part of a complete drip irrigation system, the 1/2 in. compression end cap attaches to 1/2 in. supply tubing or dripline to close the end of line and stop the flow of water
Periodically check for leaks or damage and replace as needed
- Rock the end of tubing back and forth while pushing it into the compression fitting, where an internal barb will compress the tube to hold it in place; for rigid tubing, consider soaking the tube end in hot water or leaving out in the sun
- Periodically check for leaks or damage and replace as needed
- Fits 1/2 in. tubing with outside diameter of 0.620 in.
Comes with five 1/2 in. Compression End Caps
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
