The ease of setting up a drip irrigation system is made even easier with the Adjustable Flow Bubbler Assembly. It comes preassembled and ready to install onto tubing. The patented Clamp N Pierce inlet snaps into supply tubing by hand, no tools needed. The 8-stream bubbler emits water in a full-circle pattern at up to 13 GPH and radius of 3 ft. (at 15-50 PSI). Use the dial to control amount of output. Bubbler and tubing are made of polyethylene; stake and connector are made of ABS; all materials are treated with UV inhibitors.
- Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs
- As part of a complete drip irrigation system, the emitter delivers water gradually; with this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
- Adjustable Flow Bubbler Assembly comes preassembled so its ready to installinsert the stake in the ground and connect the attached 1/4 in. tubing to larger size supply tubing with the Clamp N Pierce Connector
- Periodically check for leaks or damage and replace as needed; recommended operating pressure for most emitters is between 15 to 50 PSI
- Clamp N Pierce Connector pierces into 1/2 in., 5/8 in., and 0.710 in. supply tubing and connects 1/4 in. tubing inlet
Raindrip stands by their product and gives a 1 year 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free. Just pay shipping and handling.
