Make your DIY drip project quick, easy, and stress free with the Adjustable Flow Micro Sprinkler Assembly. The micro sprinkler, adjustable riser, stake, and inlet come preassembled and ready to install. Patented Clamp N Pierce inlet pierces supply tubing and attaches inlet at once. The 8-stream micro-sprayer emits water in a full-circle pattern at up to 13 GPH and radius of up to 3 ft. (at 15-50 PSI). Use the control dial to increase or decrease the output of water to your preference. Micro sprinkler, riser, and tubing made of polyethylene; stake and connector made of ABS plastic; all materials treated with UV inhibitors.
- Make your DIY drip project quick, easy, and stress free with the Adjustable Flow Micro Sprinkler Assembly. The micro sprinkler, adjustable riser, stake, and inlet come preassembled and ready to install. Patented Clamp N Pierce inlet pierces supply tubing
- As part of a complete drip irrigation system, the emitter delivers water gradually; with this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
- Adjustable Flow Micro Sprinkler Assembly comes preassembled so its ready to installinsert the stake in the ground, elevate or lower riser to preferred height, and connect the attached 1/4 in. tubing to larger size supply tubing with the Clamp N Pierce Con
- Periodically check for leaks or damage and replace as needed; recommended operating pressure for most emitters is between 15 to 50 PSI
- Clamp N Pierce Connector pierces into 1/2 in., 5/8 in., and 0.710 in. supply tubing and connects 1/4 in. tubing inlet
Comes with one Adjustable Flow Micro Sprinkler Assembly which includes a micro sprinkler, riser, 13 in. stake, and 1/4 in. Clamp N Pierce inlet
1 year product warranty
